Hi!

Let me introduce you wireless e-meter in solocan working with Bluetooth standard 4.0 BLE.

Here is how it looks:



And here with iPad3:

E-meter for students. Mark V emulator for Theta-Meter e-meter.

Hello dear colleagues,

We have released a new software - Mark V emulator for Theta-Meter for the most popular operating systems.



Who needs this program? Primarily it was made for students. If you want to become a professional, to study original Ron's materials, you need e-meter which works like Ron's e-meter.

Hi!

Here it is the video of the program Theta-Meter for iOS, version 2014:

Program can be found in AppStore under the name GSR Meter.

At the moment this is the only e-meter program in the world, which can work with iOS.

Among all programs for e-meter GSR Meter for iPad is the standard - comfortable interface, easy to use in the session, perfectly smooth needle movement, reliability. If you are accustomed to choose only the best, the Theta-Meter + iPad is your choice.

What you need to work in iOS (with iPad, iPhone, iPod)? For this you should buy Theta-Meter Wi-Fi Access point and one of USB Theta meters. Connect Theta-Meter to the access point, turn on the power, connect the iPad to Wi-Fi acces point, start the program GSR Meter and go in session!

Have a good session!

Mikhail Fedorov

Let's look at video:

To switch on the e-meter - press the button on the e-meter and keep it pressed 1-2 seconds. Green led start to flash slowly. The e-meter attempts to connect to a Wi-Fi router with the data recorded in its settings. Once the connection is established, the green led will stop flashing and the program begins to display the data from the e-meter. iPad 3 at the video was already connected to the same router and the settings of program was set up at work with Wi-Fi.

What happens if the router is not installed (missing or switched off)? After a couple of minutes, the green led flashes quickly, and after a minute Theta-Meter will switches off.

To configure Theta-Meter Wi-Fi Pro to work with a specific router, connect it to the computer with Windows on USB, press the button on the device, keeping it 1-2 seconds until green led lights up. Launch the program snet.exe.

Click on the Scan button Wi-Fi. In window SSID displays all the networks that device can determine at the moment. Select the one you want to connect, enter the password in the Password field and click Write Settings. Device is ready for work.

Disconnect the meter from the USB port. Press the button, hold 1-2 seconds before up to start flashing green led. Device is connected!

Forgot to say what for is the red led. When there is charging, it is red. Charging takes about 6 hours to charge, device works up to 12 hours of continuous work. After charging red led stops to lit.

Mikhail Fedorov

Hello dear colleagues.
 
In this article I want to show you how to install GSR Meter program and set it up to work with Wi-Fi e-meters Theta-Meter at iOS devices (iPad, iPhone, iPod).
 
Start App Store program at your iPad, iPhone or iPod. Type in the search line "gsr meter" and tap at the button "Search". As a result will be found 2 programs - free and paid. You can choose free version. I will show how to work full version. For free version set up actions are the same .
 
Run GSR Meter program.

What is WBB, why it is 7.3 and how to handle this?
 
WBB - Wheatstone Bridge Balance. A Wheatstone bridge is an electrical circuit used to measure an unknown electrical resistance, you can read about this here.